Atp testing for cleanliness
![atp testing for cleanliness](https://time-to-change.com/wp-content/uploads/2022/07/cleaning-13-1024x683.jpg)
People have different ways of cleaning; some prefer sanitising, While others disinfecting. Either way, we all aim for clean surfaces. The question is, how do you know the place you have cleaned is actually clean? Well, atp testing for cleanliness will give you the answer because it can tell whether the surface is clean.
Most people think they can tell whether the surface is clean by using naked eyes. The truth is viruses and bacteria can not be seen by naked eyes. They grow and replicate on surfaces without you knowing, leading to contamination.
Food industries have used ATP for cleanliness in past years; when the reading is high, the surface needs a thorough cleaning before the infection-causing viruses and bacteria react.Nowadays ATP, it is used by other industries in the hope of attaining a clean facility.
![atp testing for cleanliness atp testing for cleanliness](https://www.time-to-change.com/wp-content/uploads/2022/07/cleaning-12-1024x683.jpg)
How does ATP work
The term stands for Adenosine Triphosphate; this is a form of energy molecule found in all living organisms—testing for ATP is the same as testing for growing organisms like viruses and bacteria.
When testing for ATP, the first step is to pinpoint the surface area to test. You spot a high-touch area that may be missed during a regular cleaning routine.
The equipment needed to carry out this process is; a luminometer and ATP test swabs.
Process to carry out atp process
The cleaning technology uses this process to check whether the surfaces are clean. The procedure is as follows;
1. Turn the luminometer earlier to give it time to calibrate.
2. Have an ATP clean swab from the tube.
3. On the surface area, use the swab with slightly applied pressure and avoid touching the shaft of the swab.
4. Using your thumb and forefinger, break the end of the tube.
5. Gently squeeze the bulb twice and shake for about 5 seconds.
6. Stick the tube back into the luminometer.
7. Before you start measuring, make sure the luminometer is upright. The outcome will be ready in at least 15 seconds